|
INSTA-CURE™ Thin Cyano, 1-3 Second drying time.
|
|
INSTA-CURE+™ Gap Filling Cyano, 5-15 Second drying time.
|
|
Our Price: $9.79 Inc GST
|
|
|
|
Our Price: $9.79 Inc GST
|
|
|
|
|
|
INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds.
|
INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps.
|
|
|
|
UN-CURE™ 1 Ounce Cyano Debonder, CA Remover 30 - 120 Second working time.
|
|
SUPER-GOLD™ 1/2 Ounce Odorless Thin CA, Foam Friendly 5-10 Second drying time.
|
|
Our Price: $11.81 Inc GST
|
|
|
Our Price: $21.04 Inc GST
Sale Price: $15.47 Inc GST
You save $5.57!
|
|
|
|
|
|
UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute.
|
SUPER-GOLD™ and SUPER-GOLD+™ are our odourless Foam Friendly INSTA-CURE CAs. They are non-frosting and take only 2 or 3 seconds longer to bond.
|
|
|
|
SUPER-GOLD™ 1/2 Ounce Odorless Gap Filling CA, Foam Friendly 10-25 Second drying time.
|
|
INSTA-FLEX™ 1 Ounce Thin Flexible Cyano, Low odour 2-5 Second drying time.
|
Our Price: $21.04 Inc GST
Sale Price: $15.47 Inc GST
You save $5.57!
|
|
|
|
Our Price: $19.91 Inc GST
|
|
|
|
|
|
SUPER-GOLD™ and SUPER-GOLD+™ are our odourless Foam Friendly INSTA-CURE CAs. They are non-frosting and take only 2 or 3 seconds longer to bond. This is the Gap Filling version.
|
INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds.
|
|
|
|
INSTA-FLEX+™ 1 Ounce Gap Filling Flexible Cyano, Low odour 5-15 Second drying time.
|
|
INSTA-SET™ Cyano Accelerator
|
|
Our Price: $19.91 Inc GST
|
|
|
|
Our Price: $19.91 Inc GST
|
|
|
|
|
|
INSTA-FLEX+™ clear rubber toughened has similar qualities to our black IC-2000™ but can be used in applications where you do not want the adhesive to be seen.
|
INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization.
|
|
|
|
QUIK-CURE™ 5 Minute Epoxy, 128g (4oz) 1 to 1 Mixing Epoxy Resin Glue
|
|
MID-CURE™ 15 Minute Epoxy, 128g (4oz) 1 to 1 Mixing Epoxy Resin Glue
|
|
Our Price: $21.95 Inc GST
|
|
|
|
Our Price: $21.95 Inc GST
|
|
|
|
|
|
QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency.
|
MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed.
|
|
|
|
SLOW-CURE™ 30 Minute Epoxy, 128g (4oz) 1 to 1 Mixing Epoxy Resin Glue
|
|
FINISH-CURE™ 20 Minute Epoxy, 128g (4oz) 1 to 1 Mixing Epoxy Laminating -Finishing Resin.
|
|
Our Price: $22.95 Inc GST
|
|
|
|
Our Price: $25.82 Inc GST
|
|
|
|
|
|
SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints.
|
FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. Ideal for use with Fibre Glass cloth when skinning sheet Balsa surfaces.
|
|
|
